Rigol DS1000CA series Manual do Utilizador descarregar pdf (Página 4)

Track

Voltage value for Y-axis waveform

Time value for X-axis waveform

Auto

Cursors are visible for Automatic Measurement

Auto Measure

Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Overshoot,

Preshoot, Freq, Period, Rise Time, Fall Time, +Width, -Width,

+Duty, -Duty, Delay1→2 , Delay1→2

Vertical

A/D Converter

8-bit resolution, all channel samples simultaneously

Volts/div Range

1mV/div-10V/div (at the input terminal connecting to BNC)

Offset Range

± 40V(500mV/div-10V/div), ± 800mV(1mV/div-200mV/div)

Analog Bandwidth

60MHz(DS1062CA)

100MHz(DS1102CA)

200MHz(DS1202CA)

300MHz(DS1302CA)

Single-shot Bandwidth

60MHz(DS1062CA)

100MHz(DS1102CA)

200MHz(DS1202CA)

300MHz(DS1302CA)

Selectable Analog

Bandwidth Limit (typical)

20MHz

Lower Frequency

Response (AC -3dB)

≤5Hz (at input BNC)

Rise Time at BNC (typical)

<1.2ns, <1.7ns, <3.5ns, <5.8ns,

On 300MHz, 200MHz, 100MHz, 60MHz respectively

Dynamic Range

± 5div

DC Gain Accuracy

1mV/div: ± 8% (Normal or Average acquisition mode)

2mV/div-5mV/div: ± 4% (Normal or Average acquisition mode)

10mV/div-10V/div: ± 3% (Normal or Average acquisition mode)

DC Measurement

Accuracy Average

Acquisition Mode

When vertical displacement is zero, and N ≥16:

±(DC Gain Accuracy× reading+0.1div+1mV)

When vertical displacement is not at zero, and N≥16:

±[DC Gain Accuracy× (reading+ vertical position)+(1% of vertical

position)+0.2div]

Add 1mV for settings from 1mV/div to 200 mV/div

Add 50mV for settings >200mV/div to 10V/div

Delta Volts

Measurement Accuracy

(Average Acquisition Mode)

Under same setting and condition, the voltage difference (△V)

between any two points in the waves coming from the average of

more than 16 waves have been acquired: ±(DC Gain Accuracy×

reading + 0.05 div)

Overshoot

<20%

Trigger

Trigger Sensitivity

0.1div-1.0div (adjustable)

Trigger Level Range

Internal

± 6 divisions from center of screen

EXT

± 1V

EXT/5

± 3V

Trigger Level Accuracy (typical)

applicable for the signal of rising

and falling time ≥20ns

Internal

± (0.3div× V/div)

(± 4 divisions from center of screen)

EXT

± (6% of setting + 40 mV)

1 2 3 4 5 6 7

Comentários a estes Manuais

Sem comentários

Rigol DS1000CA series Manual do Utilizador Página 4

Comentários a estes Manuais

Manuais e produtos relacionados com Medição, teste e controlo Rigol DS1000CA series