Rigol DM3062 Especificações descarregar pdf (Página 23)

RIGOL

Service Guide for DM3000 Series

1-9

Measuring Characteristics

DC Voltage

Measurement Method: ΣΔ A/D conversion

Input Resistance:

200mV, 2V, 20V ranges Selectable 10MΩ ± 2% or >10GΩ

200V, 1000V ranges 10MΩ ± 2%

Resistance

Measurement Method: 4-wire or 2-wire.

Current source referenced to LO input.

Open-circuit Voltage: Limit less than 7V.

Max. Lead Resistance: 10% of range per lead for 200Ω, 1kΩ range. 1kΩ per lead

(4-wire ohms) on all other ranges.

Input Protection: 1000V, all ranges.

DC Current

Shunt Resistor: 0.025Ω for 1A, 10A

1.025Ω for 200mA

11.025Ω for 2mA and 20mA

Input Protection: Externally accessible 10A, 250V fuse

Internal 12A, 250V fuse

Continuity / Diode Test

Measurement Method: 1mA ± 0.2% test current, Limit in <7V

Response Time: 25 samples / sec

Continuity Threshold: Adjustable from 1Ω to 2000Ω

Input Protection: 1000V

True RMS AC Voltage

Measurement Method: AC-coupled True RMS – measures the ac component of input

with up to 400Vdc of bias on any range.

Input Impedance: 1MΩ ± 2%, in parallel with <100pF

Input Protection: 750VRMS all ranges

True RMS AC Current

Measurement Method: Direct coupled to the fuse and shunt. AC-coupled True RMS

measurement (measures the ac component only)

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 101 102

Sem comentários

Rigol DM3062 Especificações Página 23