Rigol DS1000M Guia do Utilizador descarregar pdf (Página 17)

RIGOL

User’s Guide for DS1000 Series

To Perform a Functional Check

Perform this quick functional check to verify that your instrument is operating

correctly.

1. Turn on the instrument.

Use only power cords designed for your oscilloscope. Use a power source that

delivers 100 to 240 VAC

RMS

, 45Hz to 440Hz. Turn on the instruments, and wait until

the display shows the waveform window. Push the Storage

button, select Storage in

the top menu box and push the Factory menu box.

Figure 1-5

WARNNING:

To avoid electric shock, be sure the oscilloscope is properly grounded.

2．Input a signal to a channel of the oscilloscope

① Set the switch on the probe to 10X and connect the probe to channel 1 on the

oscilloscope. To do this, align the slot in the probe connector with the key on the

CH 1 BNC, push to connect, and twist to the right to lock the probe in place.

Attach the probe tip and ground lead to the PROBE COMP connector.

Power button

Storage button

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 167 168

Sem comentários

Rigol DS1000M Guia do Utilizador Página 17