Rigol DM3058 Especificações descarregar pdf (Página 219)

RIGOL

Programming Guide for DM3058

5-103

The command sets or queries trigger source.

Explanations:

TRIGger:SOURce□{IMMediate|EXTernal|BUS}: Select the trigger source.

TRIGger:SOURce?: Query the trigger source.

The possible return value is IMMediate, EXTernal and BUS, IMMediate denotes

trigger signal will be generated immediately; EXTernal denotes external trigger

source on rear panel will be used; BUS (software trigger) denotes the command

―*TRG‖ will be trigger source. Before sending the command ―*TRG‖, the

instrument must be the state of ―wait trigger‖.

After the trigger source is selected, the instrument must be set as ―wait trigger‖

mode, or the trigger source will be accepted.

The command ―CONFigure‖ or ―MEASure?‖ can be used to set trigger source as

immediately mode (IMM).

It is suggested that the command ―SENSe:<function>:RANGe:AUTO□OFF‖

should be used to disable autorange function, the command ―SENSe:<function>:

RANGe‖, ―CONFigure‖ or ―MEASure?‖ be uesd to set range by manual.

Return Format:

The query returns current trigger source.

1 2 ... 214 215 216 217 218 219 220 221 222 223 224 ... 263 264

Sem comentários

Rigol DM3058 Especificações Página 219