Rigol M300 Manual do Utilizador

RIGOL Programming Guide DM3000 Series Digital Multimeter Oct. 2012 RIGOL Technologies, Inc.

RIGOL Chapter 1 Programming Overview Programming Guide for DM3000 1-

Chapter 1 Programming Overview RIGOL Programming Guide for DM3000 1-5 Command Set Introduction T

Chapter 2 Command System RIGOL Programming Guide for DM3000 2-1 Chapter 2 Command System In RIGOL DM3000 series digital multimeter command set,

RIGOL Chapter 2 Command System Programming Guide for DM3000 2-2 Common Commands The commands are used to query the basic information of the instrum

Chapter 2 Command System RIGOL Programming Guide for DM3000 2-3 1. *CLS Syntax *CLS Function Cl

RIGOL Chapter 2 Command System Programming Guide for DM3000 2-4 :FUNCtion Commands The commands are used to enable the common measurement functions

Chapter 2 Command System RIGOL Programming Guide for DM3000 2-5 1. :FUNCtion? Syntax :FUNCtion?

RIGOL Chapter 2 Command System Programming Guide for DM3000 2-6 Syntax :FUNCtion:FRESistance Function Enable the 4-wire resistance measurement funct

Chapter 2 Command System RIGOL Programming Guide for DM3000 2-7 :MEASure Commands The commands

RIGOL Chapter 2 Command System Programming Guide for DM3000 2-8 1. :MEASure? Syntax :MEASure? Function Query whether the current measurement is fi

Chapter 2 Command System RIGOL Programming Guide for DM3000 2-9 Function Query the current rang

RIGOL Chapter 2 Command System Programming Guide for DM3000 2-10 Function The query returns the ratio of two DC voltages in scientific notation, fo

Chapter 2 Command System RIGOL Programming Guide for DM3000 2-11 12. :MEASure:VOLTage:AC:RANGe?

RIGOL Chapter 2 Command System Programming Guide for DM3000 2-12 17. :MEASure:VOLTage:AC:FREQuency:HIDE Syntax :MEASure:VOLTage:AC:FREQuency:HIDE Fu

Chapter 2 Command System RIGOL Programming Guide for DM3000 2-13 21. :MEASure:CURRent:DC:RANGe?

RIGOL Chapter 2 Command System Programming Guide for DM3000 2-14 :MEASure:CURRent:AC MAX 25. :MEASure:CURRent:AC:RANGe? Syntax :MEASure:CURRent:AC

Chapter 2 Command System RIGOL Programming Guide for DM3000 2-15 secondary display is enabled in

RIGOL Chapter 2 Command System Programming Guide for DM3000 2-16 Function Query the current range of 2-wire resistance measurement. The query retur

Chapter 2 Command System RIGOL Programming Guide for DM3000 2-17 Explanation Refer to the “Expla

RIGOL Programming Guide for DM3000 I Guaranty and Declaration Copyright © 2010 RIGOL Technologies, Inc. All Rights Reserved. Trademark Information

RIGOL Chapter 2 Command System Programming Guide for DM3000 2-18 43. :MEASure:PERiod? Syntax :MEASure:PERiod? Function The query returns the period

Chapter 2 Command System RIGOL Programming Guide for DM3000 2-19 Syntax :MEASure:CONTinuity {<

RIGOL Chapter 2 Command System Programming Guide for DM3000 2-20 Parameter Range DM306x DM305x 0 2 nF 4 nF 1 20 nF 40 nF 2 200 nF 400 nF 3

Chapter 2 Command System RIGOL Programming Guide for DM3000 2-21 :RESOlution Commands The com

RIGOL Chapter 2 Command System Programming Guide for DM3000 2-22 1. :RESOlution:VOLTage:DC Syntax :RESOlution:VOLTage:DC? :RESOlution:VOLTage:DC {

Chapter 2 Command System RIGOL Programming Guide for DM3000 2-23 :RESOlution:VOLTage:AC {0|1|2|M

RIGOL Chapter 2 Command System Programming Guide for DM3000 2-24 :RESOlution:CURRent:DC 1 5. :RESOlution:CURRent:AC Syntax :RESOlution:CURRent:AC?

Chapter 2 Command System RIGOL Programming Guide for DM3000 2-25 Example Set the reading resolu

RIGOL Chapter 2 Command System Programming Guide for DM3000 2-26 :SYSTem Commands The commands are used to set the system parameters of the multi

Chapter 2 Command System RIGOL Programming Guide for DM3000 2-27 1. :SYSTem:BEEPer Syntax :SYST

RIGOL Programming Guide for DM3000 II In This Manual This manual p

RIGOL Chapter 2 Command System Programming Guide for DM3000 2-28 7. :SYSTem:CLOCk:DATE Syntax :SYSTem:CLOCk:DATE? :SYSTem:CLOCk:DATE <value>

Chapter 2 Command System RIGOL Programming Guide for DM3000 2-29  SPACE: use space as the data

RIGOL Chapter 2 Command System Programming Guide for DM3000 2-30 character string, for example, 03.12.00.03.09.00.02. 17. :SYSTem:TYPE? Syntax :S

Chapter 2 Command System RIGOL Programming Guide for DM3000 2-31 :UTILity Commands The commands

RIGOL Chapter 2 Command System Programming Guide for DM3000 2-32 1. :UTILity:INTErface:LAN:DHCP Syntax :UTILity:INTErface:LAN:DHCP? :UTILity:INTEr

Chapter 2 Command System RIGOL Programming Guide for DM3000 2-33 5. :UTILity:INTErface:LAN:MASK

RIGOL Chapter 2 Command System Programming Guide for DM3000 2-34 :UTILity:INTErface:GPIB:ADDRess <value> Function Set the GPIB address of the

Chapter 2 Command System RIGOL Programming Guide for DM3000 2-35 :TRIGger Commands The commands

RIGOL Chapter 2 Command System Programming Guide for DM3000 2-36 1. :TRIGger:SOURce Syntax :TRIGger:SOURce? :TRIGger:SOURce {AUTO|SINGLE|EXT} Func

Chapter 2 Command System RIGOL Programming Guide for DM3000 2-37 :TRIGger:AUTO:HOLD {ON|OFF|1|0}

RIGOL Programming Guide for

RIGOL Chapter 2 Command System Programming Guide for DM3000 2-38 The query returns RISE or FALL. Default RISE 8. :TRIGger:VMComplete:POLAr Syntax

Chapter 2 Command System RIGOL Programming Guide for DM3000 2-39 :CALCulate Commands The comman

RIGOL Chapter 2 Command System Programming Guide for DM3000 2-40 1. :CALCulate:FUNCtion Syntax :CALCulate:FUNCtion? :CALCulate:FUNCtion {NONE|NULL

Chapter 2 Command System RIGOL Programming Guide for DM3000 2-41 2. :CALCulate:STATistic:MIN? S

RIGOL Chapter 2 Command System Programming Guide for DM3000 2-42 Syntax :CALCulate:NULL:OFFSet? :CALCulate:NULL:OFFSet {<range>|MIN|MAX|DEF}

Chapter 2 Command System RIGOL Programming Guide for DM3000 2-43 Function Set the reference val

RIGOL Chapter 2 Command System Programming Guide for DM3000 2-44 The query returns PASS or FAIL. Explanation Limit operation function must be enab

Chapter 2 Command System RIGOL Programming Guide for DM3000 2-45 AC voltage 0 - 900 1 V DC cu

RIGOL Chapter 2 Command System Programming Guide for DM3000 2-46 :DATAlog Commands The commands are used to set the datalog parameters of the instr

Chapter 2 Command System RIGOL Programming Guide for DM3000 2-47 1. :DATAlog:CONFigure? Syntax

RIGOL Chapter 2 Command System Programming Guide for DM3000 2-48 Syntax :DATAlog:CONFigure:STARtmode:EXTern Function Set the start mode of the curr

Chapter 2 Command System RIGOL Programming Guide for DM3000 2-49 <range> Sample rate (n

RIGOL Chapter 2 Command System Programming Guide for DM3000 2-50 returned. Example Query and return three data starting from number 2: :DATAlog:DA

Chapter 2 Command System RIGOL Programming Guide for DM3000 2-51 :SCAN Commands The commands ar

RIGOL Chapter 2 Command System Programming Guide for DM3000 2-52 1. :SCAN:PROJect? Syntax :SCAN:PROJect? Function Query the name of the scan proj

Chapter 2 Command System RIGOL Programming Guide for DM3000 2-53 Quency.  <Range>: the

RIGOL Chapter 2 Command System Programming Guide for DM3000 2-54 9. :SCAN:RUN Syntax :SCAN:RUN <Cycles> Function Set the number of cycles o

Chapter 3 Commands Compatibility RIGOL Programming Guide for DM3000 3-1 Chapter 3 Commands Compatibility DM3000 series digital multimeter not on

RIGOL Chapter 3 Commands Compatibility Programming Guide for DM3000 3-2 Agilent Commands Compatibility The table below lists the Agilent commands s

Chapter 3 Commands Compatibility RIGOL Programming Guide for DM3000 3-3 {MINimum|MAXimum} CALCulate:L

Chapter 1 Programming Overview RIGOL Programming Guide for DM3000 1-1 Chapter 1 Programming Overview This chapter introduces how to program us

RIGOL Chapter 3 Commands Compatibility Programming Guide for DM3000 3-4 CONFigure:PERiod [{<range>|MIN|MAX|DEF}[,{<resolution>|MIN|MAX|D

Chapter 3 Commands Compatibility RIGOL Programming Guide for DM3000 3-5 current measurement. Note: th

RIGOL Chapter 3 Commands Compatibility Programming Guide for DM3000 3-6 [SENSe:]CAPacitance:RANGe:AUTO <mode> of capacitance measurement. [SE

Chapter 3 Commands Compatibility RIGOL Programming Guide for DM3000 3-7 does not support the NPLC val

RIGOL Chapter 3 Commands Compatibility Programming Guide for DM3000 3-8 [SENSe:]FREQuency:RANGe:LOWer {<filter>|MIN|MAX|DEF} 200. The “DEF” is

Chapter 3 Commands Compatibility RIGOL Programming Guide for DM3000 3-9 [SENSe:]FUNCtion[:ON] "&

RIGOL Chapter 3 Commands Compatibility Programming Guide for DM3000 3-10 [{<range>|MIN|MAX|DEF} [,{<resolution>|MIN|MAX|DEF}]] trigger p

Chapter 3 Commands Compatibility RIGOL Programming Guide for DM3000 3-11 <slope> can be POSitiv

RIGOL Chapter 3 Commands Compatibility Programming Guide for DM3000 3-12 {<range>|MIN|MAX|DEF} [SENSe:]RESistance:RESolution? [{MIN|MAX}] [SEN

Chapter 3 Commands Compatibility RIGOL Programming Guide for DM3000 3-13 [SENSe:]VOLTage[:DC]:IMPeda

RIGOL Chapter 1 Programming Overview Programming Guide for DM3000 1-

RIGOL Chapter 3 Commands Compatibility Programming Guide for DM3000 3-14 beeper is enabled. SYSTem:COMMunicate:ENABle? <interface> DM3000 only

Chapter 3 Commands Compatibility RIGOL Programming Guide for DM3000 3-15 SYSTem:COMMunicate:LAN:SMASk

RIGOL Chapter 3 Commands Compatibility Programming Guide for DM3000 3-16 Fluke Commands Compatibility The following table lists the Fluke commands s

Chapter 3 Commands Compatibility RIGOL Programming Guide for DM3000 3-17 <value> Reference Val

RIGOL Chapter 3 Commands Compatibility Programming Guide for DM3000 3-18 modes. If none of the modifier modes is selected, the query returns 0. REL

Chapter 3 Commands Compatibility RIGOL Programming Guide for DM3000 3-19 COMPCLR Exit the compare (CO

Appendix: Command Quick Reference RIGOL Programming Guide for DM3000 1 Appendix: Command Quick Reference *CLS 2-3 *IDN? 2-3 *RST 2-3 C CMDS

RIGOL Appendix: Command Quick Reference Programming Guide for DM3000 2 :MEASure:VOLTage:DC:RATIo? 2-9 :MEASure:VOLTage:DC:RATIo:DIGIt 2-10 :MEASur

Appendix: Command Quick Reference RIGOL Programming Guide for DM3000 3 :SYSTem:DISPlay:CONTrast 2-29 :S

Chapter 1 Programming Overview RIGOL Programming Guide for DM3000 1-3 Symbol Description 1. Col