Rigol M300 Manual do Utilizador descarregar pdf (Página 68)

RIGOL Chapter 3 Commands Compatibility

Programming Guide for DM3000

3-2

Agilent Commands Compatibility

The table below lists the Agilent commands supported by RIGOL DM3000 series

digital multimeter. Before using the commands, please select the Agilent command set

using the CMDSet command (send the CMDSet AGILENT command). For more

details on this command, please refer to the “Command Set Introduction” in Chapter

Note: the functions of the Agilent commands in RIGOL DM3000 series digital

multimeter are listed in the “Function” column in the table below.

Agilent Command Function

CALCulate:AVERage:AVERage?

Query the average of all the data in the statistic

operation.

CALCulate:AVERage:CLEar Disable the statistic function.

CALCulate:AVERage:COUNt? Query the number of statistic data.

CALCulate:AVERage:MAXimum? Query the maximum of the statistic data.

CALCulate:AVERage:MINimum? Query the minimum of the statistic data.

CALCulate:AVERage:PTPeak? Query the peak-peak value of the statistic data.

CALCulate:AVERage:SDEViation? Query the standard deviation of the statistic data.

CALCulate:DB:REFerence?

{MINimun|MAXimun}

CALCulate:DB:REFerence

{<value>|MINimum|MAXimum}

Query and set the dB reference value.

CALCulate:DBM:REFerence?

{MINimun|MAXimun}

CALCulate:DBM:REFerence

{<value>|MINimum|MAXimum}

Query and set the dBm reference value.

CALCulate:FUNCtion?

CALCulate:FUNCtion

{NULL|DB|DBM|AVERage|LIMit}

Query and set the math operation function.

CALCulate:LIMit:LOWer?

{MINimum|MAXimum}

CALCulate:LIMit:LOWer

{<value>|MINimum}

Query and set the lower limit of the current

measurement function.

CALCulate:LIMit:UPPer? Query and set the upper limit of the current

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 88 89

Sem comentários

Rigol M300 Manual do Utilizador Página 68