Rigol M300 Manual do Utilizador descarregar pdf (Página 44)

RIGOL Chapter 2 Command System

Programming Guide for DM3000

2-32

1. :UTILity:INTErface:LAN:DHCP

Syntax :UTILity:INTErface:LAN:DHCP?

:UTILity:INTErface:LAN:DHCP {ON|OFF|1|0}

Function Enable or disable the DHCP setting.

The query returns ON or OFF.

Explanation The three modes (DHCP, Auto IP and Manual IP) are not permitted

be disabled at the same time.

Default ON

:UTILity:INTErface:LAN:AUTOip

Syntax :UTILity:INTErface:LAN:AUTOip?

:UTILity:INTErface:LAN:AUTOip {ON|OFF|1|0}

Function Enable or disable the AutoIP setting.

The query returns ON or OFF.

Explanation

The three modes (DHCP, Auto IP and Manual IP) are not permitted

be disabled at the same time.

Default

3. :UTILity:INTErface:LAN:MANUip

Syntax :UTILity:INTErface:LAN:MANUip?

:UTILity:INTErface:LAN:MANUip {ON|OFF|1|0}

Function

Enable or disable the ManualIP setting.

Explanation

The three modes (DHCP, Auto IP and Manual IP) are not permitted

be disabled at the same time.

Default OFF

:UTILity:INTErface:LAN:IP

Syntax :UTILity:INTErface:LAN:IP?

:UTILity:INTErface:LAN:IP

<ip_address>

Function Users define the IP address of the multimeter.

Explanation  The format of

<ip_address>

is “nnn.nnn.nnn.nnn”. The first

“nnn”

ranges from 0 to 223 (except 127) and the others range

from 0 to 255.

 The IP address configuration type should be Manual and both

DHCP and AutoIP should be disabled when you use this

command.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 88 89

Comentários a estes Manuais

Sem comentários

Rigol M300 Manual do Utilizador Página 44

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos de medida Rigol M300